Click here to go to the home page   APPLICATIONS   PRODUCTS    SUPPORT   CONTACT    SEARCH
 

XPDK-S Super Triad

The XPDK-S-300/500 synthesized diversity receivers offer optimum capability to overcome picture breakup and color distortion in applications where the transmitter or receiver are in motion. They can be used with any transmitter within their operating band set to the same frequency and deviation.

The XPDK operates by using multiple receivers and antennas to look at and evaluate a single transmitted signal. The theory is that one of the arriving signals will be better than the others. The best signal will be selected and automatically switched to at over 15,725 times per second. In addition, antennas may be routinely mounted 100' from the receiver rack, enabling the agent to position the antenna around obstructions.

The XPDK-S series combines either three or five receivers in a standard 19" rack, and is ideal for command post or surveillance van mounting.

Multiple camera systems are supported in the MegaCam™ configuration, shown in upper right. Antennas are often shared between rack receivers by using customized antennas spitters.

Features

  • Designed for rack mounting in surveillance van or camper top
  • Multiple receiver architecture, either 3 or 5 receivers installed
  • Automatic receiver switching during horizontal interval
  • DTC proprietary VideoVoter™ logic board
  • DTC’s circularly polarized antennas minimize multipath
  • Up to ten factory programmed channels switch selectable
  • Antennas may be mounted up to 100' away
  • Each receiver has its own RSSI display
  • Each receiver may be turned On/Off
  • Available in 1700 to 1850 MHz, 2200 to 2300 or 2400 to 2500 MHz bands

Ordering Information

  • XPDK-300, three receivers installed, rack unit only
  • XPDK-500, five receivers installed, rack unit only
  • Select up to ten factory programmed frequencies
  • Select up to two audio sub-carries

PERMANENT RACK MOUNT KITS & TRANSPORTABLE KITS
PERMANENT RACK MOUNT KITS   TRANSPORTABLE KITS
XPDK-S-550-ENG Five receiver module
TX/RX Kit
  SPDK-S-550-STD, Five receiver module
TX/RX Kit
Each kit contains:   Each kit contains:
(1) XPD-500 rack mount system with 5 receiver modules   (1) XPD-500 rack mount system with 5 receiver modules
(1) VMS/L-250 mW transmitter   (1) VMS/L-250 mW transmitter
(5) ANT-4-R 4dBi omnidirectional RHCP TX rod antennas   (1) ANT-2 2 dBi omnidirectional RHCP TX Rod Antenna
(5) MAG-2 magnetic antenna mounts for ANT-4 antennas   (5) ANT-10-R 10 dBi directional patch RHCP RX antenna
(1) PS-1 power supply, 90-240 VAC in 24 VDC out, 40W   (5) MAF-1 quick grip antenna mounts
(1) ANT-2 2dBi omnidirectional antenna   (5) CK-25 TNC to TNC antenna cables ­ 25 foot
(1) PS-1 power supply, 90-240 VAC in 24 VDC out, 40W
XPDK-S-350-ENG Three receiver module TX/RX Kit   SPDK-S-350-STD, Three receiver module TX/RX Kit
Each kit contains:   Each kit contains:
(1) XPD-300 rack mount system with 3 receiver modules   (1) XPD-300 rack mount system with 3 receiver modules
(1) VMS/L-250 mW transmitter   (1) VMS/L-250 mW transmitter
(3) ANT-4-R 4dBi omnidirectional RHCP TX rod antennas   (1) ANT-2 2 dBi Omnidirectional RHCP TX Rod Antenna
(3) MAG-2 magnetic antenna mounts for ANT-4 antennas   (3) ANT-10-R 10 dBi directional patch RHCP RX antennas
(1) PS-1 power supply, 90-240 VAC in, 24 VDC out, 40W   (3) MAF-1 quick grip antenna mounts
(1) ANT-2 2dBi omnidirectional antenna   (3) CK-25 TNC to TNC antenna cables ­ 25 foot
((1) PS-1 power supply, 90-240 VAC in, 24 VDC out, 40W

Specifications
Front Panel-Main Control
Control Group Two position power Switch, illuminated on
Channel Select Ten position thumb wheel
Channel Select Indicator LCD 5 digit display
Front Panel-Receiver Segmented Area
Receiver Activated Switch Two position On/Off, illuminated on
Receiver LEDs 10 LED array used for signal strength each receiver
Receiver Selected LED Green LED active when receiver signal is selected for video
Rear Panel
Power Input XLR-4 pin, male
Audio Left XLR-3 pin, male
Audio Right XLR-3 pin, male
Video BNC, female
Circuit Breaker 5 Amps
Antenna Connectors TNC, female (5)
RF/DC Integrated DC power provided to power
Active Antenna remote antenna on single cable
Audio
Audio Sub-carrier 6.0 and 6.5 MHz standard, others optional
Audio Frequency Response 100 Hz to I5 KHz
Total Harmonic Distortion <2.0%
Audio Output Level I V p-p
Audio Impedance 600 Ohms
Video
Frequency Ranges 1700 to 1850 MHz, standard
2200 to 2300 MHz standard
2400 to 2500 MHz standard
Signal Formats NTSC, PAL
Modulation Bandwidth Wideband FM
Video Output I V p-p
Video Deviation ±4.0 MHz standard, options available
Automatic Gain Control Yes
Electrical
Input Voltage 12 to 32 VDC
Input Current 300 mA (each RX)
R-F Input Impedance 50 Ohms/TNC connector
Diversity System 3 RX minimum, 5 RX max
Dimensions 16.75"L x 14"W x 1.75"D

 

 

     BACK TO TOP

 

 

DTC Communications
486 Amherst Street
Nashua, NH 03063

800-233-8639
www.dtccom.com

© 2006 Copyright DTC Communications, Inc. All Rights Reserved

ABOUT DTC

PRODUCTS

APPLICATIONS

RFQ

LINKS