 |
| Digital
Video Transmitter TX-100 |
Palladium Digital Video TX
The Palladium Series of digital video transmitters
provide exceptional video quality in high multipath
environments. They are ideal for use inside buildings,
in urban areas, and other applications where multipath
would normally cause video tearing or breakup.
All Palladium Series transmitters are designed
for 2.5 MHz channel spacing and use approximately
400 carriers to transmit video and two channels
of voice and data. Transmitters may be located
on adjacent channels without a guard band. AES
encryption ensures users of secure communications.
The Palladium 100 is a small transmitter with
a 100 mW RF power output. It’s ideal for
concealments, on-body transmission systems, and
in shorter range robotic and UAV applications.
The package is only 5.5” x 2.5” x
0.75”. Power consumption is 7.5 Watts. All
connections are conveniently located off the end
of the unit. Many users will want to power this
device with disposable batteries.
Features
- 100 mW or 250 mW Power Output
- Narrowband COFDM modulation using 400 carriers
- Optional DVB-T compliant using 2000 carriers
- 2.5 MHz channel bandwidth (400 carriers)
- Small package size
- Low current drain
- Internal AES 128 encryption
- Rugged milled aluminum housing
- No external heat sinking requirements
- Operating Frequency:
L1 (1150 - 1400 MHz)
L (1710 - 1850 MHz)
S2 (2200 - 2300 MHz)
S (2350 - 2500 MHz)
- Two high quality audio channels and one data
channel
- Composite Video Input
|
|
 |
| Digital
Video TX/RX Kit |
Palladium Digital Video TX/RX Kit
The Palladium Digital Transmitter and Receiver
Kit includes everything you need to transmit and
receive high-quality video using the most advanced
digital technology. Simply connect your video
source or camera to the transmitter input and
follow the simple Quick Start instructions for
connecting antennas and power.
This kit is ideal for use inside buildings, in
urban areas, and in other applications where multipath
would normally cause video tearing or breakup.
Kit components include the Palladium 100 Transmitter,
Palladium Receiver, two magnetic mount receiver
antennas, a dipole transmitter antenna, batteries,
cables, and
connectors.
The Palladium digital video transmitter provides
exceptional video quality in high multipath environments.
The transmitter and receiver are designed for
spectrum-efficient 2.5 MHz channel spacing. Approximately
400 carriers are used to transmit video and two
channels of voice and data. Palladium transmitters
may be located on adjacent channels without a
guard band. AES 128-bit encryption ensures users
of secure communications.
Features
- Palladium COFDM Digital Technology
- Palladium Digital Receiver
- TX power output of 100 mW or 250 mW
- Two audio channels and one data channel
- Operating Frequency:
L1 (1150 - 1400 MHz)
L (1700 - 1850 MHz)
S2 (2200 - 2300 MHz)
S (2350 - 2500 MHz)
- AES 128 bit Encryption
- Optional 256 bit encryption
- Battery Pack
- Palladium Digital Receiver
- Optional 2 Magnetic Mount Antennas
High Gain Collinear Antennas
- Dipole Antenna
|
BACK TO TOP
ABOUT DTC